2008 CAT 416E for sale in Lincoln, NE

Machine ran and operated but has numerous areas that need attention.| Backhoe Loaders SMU/Hrs 4949 | Backhoe Loaders Configuration 4-Wheel Drive Yes Auxillary Hydraulics Yes Hand Metering Unit Yes Bucket, Rear Yes Controls, Lever Yes Bucket, GP Yes Stick, Extended Yes Ride Control Yes Air Conditioner Yes EROPS Yes | General Appearance Cleaning Required Yes   Comments: Machine needs washed and cleaned. S.O.S. Taken No Sheet Metal Good Paint Fair   Comments: Paint is scratched, scuffed and has surface rust. Grab Irons Good Steps / Ladder Fair   Comments: Left side cab entry step is bent. Cab or Canopy Good Counterweight Good Main Frame Welds Good Crankcase Guard / Battery Box Good Fuel Tank Good Fenders Good Eng. Enclose Hood / Stack Fair   Comments: Both side panels are cracked at upper mount holes. Radiator Grill & Shroud Good | Safety Items Horn Good ROPS Yes | Gauges / Operator Station / Console Back Up Alarm Yes Current O&MM No Current Safety Manual No Seat Belt Good Glass/Mirrors Good Air Conditioner Good Door Latches Good EMS Panel / Warnings Good Seat Cushhion / Arm Rest Good Heater Good Switches Good Gauges Good Meter Good Dash Console Fair   Comments: Guage panel mount tabs are broken allowing panel to be loose. | Engine Notes Engine seemed to operate properly. Belts / Pulleys Good Exhaust / Mufflers Good Air Cleaners Fair   Comments: Air box lid latches are worn won't stay latched. Smoke (B/D/L/W) Normal Oil Pressure (H/L/N) Normal Anti-Freeze Color Red Fluid Levels OK? Yes Water in Oil No Knocking No Blow By No Oil Leaks Yes   Comments: Oil drain plug and oil fill neck at front cover are leaking. Dipstick seal flange is broken away from dipstick and is leaking. | Cooling System Leaks No Belts / Pulleys Good Hoses Good Radiator Good | Electrical / Starting and Charging System Block Heater Yes Signal Lights No   Comments: Front and right rear hazard lights are inop. Lighting Fair   Comments: Left tail light is inop. Wiring Good Alternator Good Starter Good Batteries / Cables Good | Transmission Notes Transmission seemed to shift properly. Leaks No Transmission - Noisy No Transmission - Forward Shifts Good Transmission - Reverse Shifts Good Lines / Fittings Good Universal Joints Good Torque Converter Good Seals Good Controls Good Case Good Transmission - Type Good   Comments: Standard shift | Steering Lines / Fittings Good Steering Cylinder Good Tie Rods / Rod Ends Good Steering Linkage Good | Brakes Holding What Gear? 2nd Leaks No Parking Brake Good | Hydraulics Leaks Yes Accumulator Charge - Ride Control Good Control Linkage Good Pumps & Valves Fair   Comments: Backhoe control valve is leaking and needs resealed. Hose Lines Fair   Comments: Case drain and hydraulic filll tube are leaking around clamps at tank. Hoses are in swing frame area are chaffed. Stick Cylinder Good Swing Cylinder Good Out Rigger Cylinder Good Boom Cylinder Good Tilt Cylinder Fair   Comments: Loader bucket cylinder is leaking and needs resealed. Lift Cylinders Good Operating Condition Good | Boom And Stick Notes Stabilizer mount pins and bushings have some play in them. Swing Pivot Fair   Comments: Swing frame mount pins and bushings are worn to the point of replacement. Stick Pins & Bushings Fair   Comments: Stick to boom mount pin and bushings have some play in them. Boom Fair   Comments: Boom protection plate is bent at bottom. Boom Pins & Pushings Fair   Comments: Boom mount pins and bushings are worn to the point of replacement. Stick Fair   Comments: Extendabel slides are worn causing sections to be loose. | Bucket Loader Frame Good Loader Pins & Bushings Fair   Comments: Loader bucket mount and linkage pins and bushings have some play in them. Bucket Linkage Fair Bucket Sides Good Bucket Bottom Good Cutting Edges Good | Rear Bucket Notes 24" Bucket Sides Good Bucket Bottom Good Teeth / Adapters Good Cutting Edges Good | Final Drives Leaks No Front Final Drives Good Differentials Good Trunion Good Wheel Lugs & Rims Good | Tires Tire Size 12.5/80-18 21L24 Left-Rear - Side Cuts Section No Left-Rear - Tread Cuts/Chunks No Left-Rear - Recapped No Left-Rear - Tread Depth in 1/32in 27/32 Left-Rear - Make/Serial# Samson Right-Rear - Side Cuts Section No Right-Rear - Tread Cuts/Chunks Yes Right-Rear - Recapped No Right-Rear - Tread Depth in 1/32in 30/32 Right-Rear - Make/Serial# Samson Left-Front - Side Cuts Section No Left-Front - Tread Cuts/Chunks No Left-Front - Recapped No Left-Front - Tread Depth in 1/32in 21/32 Left-Front - Make/Serial# Samson Right-Front - Side Cuts Section No Right-Front - Tread Cuts/Chunks No Right-Front - Recapped No Right-Front - Tread Depth in 1/32in 21/32 Right-Front - Make/Serial# Samson


Demag AC160-2 -

Demag AC160-2 -

Syracuse, NY
Posted on: October 19
Additional Information Main boom 210' with quick disconnect system, 30'-56' swing-away jib, - Main boom 210' with quick disconnect system - 30'-56' swing-away jib - 52' main boom extension (2x26') - 5 axle crane carrier - Drive & Steer 10x8x8 - 5 sheave block - 1 sheave block - quick disconnect for outriggers - CWT 119,500LB - dolly preparation - air conditioning - rooster sheave + 2nd boom head ...

Demag AC200-1 -

Demag AC200-1 -

Syracuse, NY
Posted on: October 19
Additional Information COMING SOON!! Worldwide Engine, 41'-223' Boom, 30'-56' Jib, Single Line Hook, 3 blocks - Worldwide Engine - 41'-223' Boom - 30'-56' Jib - Single Line Hook - 3 blocks - Telescopic boom HA: 41-223' (12,5m- 67,8m) - rooster sheave - HAV17: Double folding swing-away jib 30'-56' (9m/17m) manual offset 20 degree/40 degree 1-sheaved head, Incl. transport storage - VA16: 8m/16m...

Demag AC250-1 -

Demag AC250-1 -

Syracuse, NY
Posted on: October 19
Additional Information 48'-262' Main Boom, 32'-65' Hydraulic offsettable Jib, 26'-52' Telescopic boom extension, - 48'-262' Main Boom - 32'-65' Hydraulic offsettable Jib - 26'-52' Telescopic boom extension - 213,000 lbs of counterweight -125ton-5 sheave hook block - 80 ton- 3 sheave hook block - single line hook - Dolly Preparation, with automatic rigging system - Innovative Demag IC-1 crane con...

Demag AC350-6 -

Demag AC350-6 -

Syracuse, NY
Posted on: October 19
Additional Information 210' 6 section Main Boom, Drive/Steering 12 x 8 x 10, automated rear axle steering system. CRANE CARRIER: - 210' 6 section Main Boom - Drive/Steering 12 x 8 x 10 - automated rear axle steering system - 4 telescopic outriggers with automatic leveling - Automatic centralized lubrication - 8 cylinder DaimlerChrysler OM 502 LA - 612 HP Tier 3 diesel engine - ZF AS-Tronic incl...

Demag AC40-1 -

Demag AC40-1 -

Syracuse, NY
Posted on: October 19
Additional Information 3-axle CITY CRANE, Drive & Steer 6x4x6, Main boom 102' - 3-axle CITY CRANE - Drive & Steer 6x4x6 - Main boom 102' - Boom head traverse cpl.: Searcher hook, incl.shackle and hook - HAV13: 7,1/ 13,0m, Double folding swing-away jib, manual offset 30°, 1-sheaved head, Incl. transport storage, Includes HAV7 - Counterweight rigging device - Cast counterweight 3-pieces - Hook bl...

Don't Be a Victim of Fraud

  • Electronic Scams
  • Home-based jobs
  • Fake Rentals
  • Bad Buyers
  • Non-Existent Merchandise
  • Secondhand Items
  • More...

Don't Be Fooled

  • When selling, do not put your home address in your ad.
  • To avoid scams, buy and sell with people you can meet locally, in person.
  • When meeting with someone you don't know, meet in a public place. If that's not possible, have a buddy with you. Also, carry a cell phone; if you feel unsafe, you can call a trusted friend, and stay on the line.
  • Never give out financial or private information like account numbers, PayPal login, or social security number.
  • If an offer sounds too good to be true, it is. Walk away!

More Listings

2007 CAT 416E
Lincoln, NE
2008 CAT CB-534DXW
Gering, NE
2008 CAT 140M VHP PLUS
Omaha, NE
2008 CAT CB-534D
Doniphan, NE
2008 CAT TH560B
Lincoln, NE