|
CHASSISThe chassis is constructed with W21 x 62 pound I-beam main frame rails. It has a heavy duty impactormount with both weld in and bolt on wear liners. The chassis also has an integrated grizzly bypass chuteto allow finer material to fall through the grizzly section of the feeder and to the discharge area of themachine. Four 36" stroke hydraulic legs with 12volt pump are used to raise and level the plant foroperation. The plant comes equipped with king pin and a heavy duty triple axle suspension with 11 x 22.5tires, air brakes, lights, and mud flaps.FEEDERThe feeder is an Inertia 60" x 20' vibrating grizzly consisting of heavy channel and plate construction. Ithas ½" weld in floor and side liners and a 4' long grizzly bar section with 5" nominal spacing. The feederuses two Invicta BL 75-150 vibrating motors along with a slight decline in angle to feed the impactor.HOPPERThe hopper is removable and is 9' wide x 20' long, 16 cubic yards non-heaping. It is constructed of 5/8"plate and has a heavy-duty bolt on chain curtain to prevent material blow back from impactor.IMPACTORThe impactor is an Inertia 5066 HSI (50" diameter x 65" wide) single rotor impact crusher withsectionalized frame construction of both welded and bolted heavy plate steel. It has replaceable frameliners of HARDOX-400 material with a wear resistant steel rotor and cast replaceable blow bars. Theimpactor has two adjustable breaker plates lined with HARDOX-400 material to control productgraduation and a spring relief system for non-crushable material. It incorporates self-aligning sphericalroller bearings and 4 bolt, split pillow blocks which are protected from dust contamination via a nonrupturablelabyrinth seal. It has four access doors for internal observation, inspection, maintenance, andrepair.POWER/DRIVEThe plant is powered by a Diesel engine that belt drives the impactor The beltdrive has a fully enclosed guard with two service doors.
|
|
|
|
|
Syracuse, NY
Posted on: October 19
Additional Information
Main boom 210' with quick disconnect system, 30'-56' swing-away jib,
- Main boom 210' with quick disconnect system
- 30'-56' swing-away jib
- 52' main boom extension (2x26')
- 5 axle crane carrier
- Drive & Steer 10x8x8
- 5 sheave block
- 1 sheave block
- quick disconnect for outriggers
- CWT 119,500LB
- dolly preparation
- air conditioning
- rooster sheave + 2nd boom head ...
|
|
|
|
Syracuse, NY
Posted on: October 19
Additional Information
COMING SOON!! Worldwide Engine, 41'-223' Boom, 30'-56' Jib, Single Line Hook, 3 blocks
- Worldwide Engine
- 41'-223' Boom
- 30'-56' Jib
- Single Line Hook
- 3 blocks
- Telescopic boom HA: 41-223' (12,5m- 67,8m)
- rooster sheave
- HAV17: Double folding swing-away jib 30'-56' (9m/17m) manual offset 20 degree/40 degree
1-sheaved head, Incl. transport storage
- VA16: 8m/16m...
|
|
|
|
Syracuse, NY
Posted on: October 19
Additional Information
48'-262' Main Boom, 32'-65' Hydraulic offsettable Jib, 26'-52' Telescopic boom extension,
- 48'-262' Main Boom
- 32'-65' Hydraulic offsettable Jib
- 26'-52' Telescopic boom extension
- 213,000 lbs of counterweight
-125ton-5 sheave hook block
- 80 ton- 3 sheave hook block
- single line hook
- Dolly Preparation, with automatic rigging system
- Innovative Demag IC-1 crane con...
|
|
|
|
Syracuse, NY
Posted on: October 19
Additional Information
210' 6 section Main Boom, Drive/Steering 12 x 8 x 10, automated rear axle steering system.
CRANE CARRIER:
- 210' 6 section Main Boom
- Drive/Steering 12 x 8 x 10
- automated rear axle steering system
- 4 telescopic outriggers with automatic leveling
- Automatic centralized lubrication
- 8 cylinder DaimlerChrysler OM 502 LA - 612 HP Tier 3 diesel engine
- ZF AS-Tronic incl...
|
|
|
|
Syracuse, NY
Posted on: October 19
Additional Information
3-axle CITY CRANE, Drive & Steer 6x4x6, Main boom 102'
- 3-axle CITY CRANE
- Drive & Steer 6x4x6
- Main boom 102'
- Boom head traverse cpl.: Searcher hook, incl.shackle and hook
- HAV13: 7,1/ 13,0m, Double folding swing-away jib, manual offset 30°, 1-sheaved head, Incl. transport storage, Includes HAV7
- Counterweight rigging device
- Cast counterweight 3-pieces
- Hook bl...
|
- Electronic Scams
- Home-based jobs
- Fake Rentals
- Bad Buyers
- Non-Existent Merchandise
- Secondhand Items
- More...
|
- When selling, do not put your home address in your ad.
- To avoid scams, buy and sell with people you can meet locally, in person.
- When meeting with someone you don't know, meet in a public place. If that's not possible, have a buddy with you. Also, carry a cell phone; if you feel unsafe, you can call a trusted friend, and stay on the line.
- Never give out financial or private information like account numbers, PayPal login, or social security number.
- If an offer sounds too good to be true, it is. Walk away!
|
|
|
|
