|
2009 Inertia SpecPro IICHASSISInertia chassis constructed of 4" square tube with ¼" wall, 3" square tube with ¼" wall with all welding done in position. The chassis is equipped with 4 adjustable height pin able legs to adjust height for customer's conveyors. Special screen mount 6' x 18' SpecPro with adjustable height supports for the ability to adjust the angle of screen to help control screening efficiency. The plant is equipped with king pin and suspension with 22,000# axle, 11:00x22.5 tires, air brakes, lights, and mud flaps.SCREENInertia SpecPro 6' x 18' screen with eleven variable speed (0-3600rpm) electric vibrators with adjustable slide counterweight force amplitude settings. The screen has a collecting hopper constructed of 3/16" A-36 steel with ¼" urethane liners to limit fines build up. The top deck chute is 6' x 36" and constructed of 3/16" plate with ¼" wear liners that discharges on to a cross conveyor. The bottom deck chute is 6' x 36" and constructed of 3/16" plate with ¼" wear liners. The screen has five independent screen panels (6'x6') with adjustable speed control via a/c inverters located in the electric enclosure.DELIVERY CONVEYORThe delivery conveyor is 36" x 30' overhead screen mounted. It has 4' receiving hopper and CEMA "B" four inch idlers. The tail pulley is a 12" wing pulley with 2 7/16" pillow block bearing bolted to 18" telescoping take-ups. The head pulley is a 12" crowned drum pulley with vulcanized rubber lagging and 2 7/16" pillow block bearings. The conveyor is belt driven by a 10hp electric motor and 415 reducer combination. The conveyor belt is 3 ply 330 with a flexco belt splice.CROSS CONVEYORThe cross conveyor is 30" x 12' with a 4' manual folding tail section under chute mounted. It has CEMA "B" four inch idlers. The tail pulley is an 8" crowned drum pulley with 1 15/16" bearings in 9" narrow slot take-ups. The head pulley is an 8" crowned drum pulley with 1 15/16" pillow block bearings. The conveyor is belt driven by a 5hp electric motor and 215 reducer combination. The conveyor belt is 2 ply 220 with a flexco belt splice.POWERPower is to be supplied by an outside source and ran to the NEMA 4 enclosure mounted on the chassis. The enclosure houses a 100amp disconnect, (5) a/c inverters for controlling the screen, starters for the delivery and cross conveyors, and 2 extra 20hp starters for customer conveyors. All wiring form panel to screen and conveyor motors. There is a 12volt pump used to raise and lower the screen box for operation or transport position
|
|
|
|
|
Syracuse, NY
Posted on: October 19
Additional Information
Main boom 210' with quick disconnect system, 30'-56' swing-away jib,
- Main boom 210' with quick disconnect system
- 30'-56' swing-away jib
- 52' main boom extension (2x26')
- 5 axle crane carrier
- Drive & Steer 10x8x8
- 5 sheave block
- 1 sheave block
- quick disconnect for outriggers
- CWT 119,500LB
- dolly preparation
- air conditioning
- rooster sheave + 2nd boom head ...
|
|
|
|
Syracuse, NY
Posted on: October 19
Additional Information
COMING SOON!! Worldwide Engine, 41'-223' Boom, 30'-56' Jib, Single Line Hook, 3 blocks
- Worldwide Engine
- 41'-223' Boom
- 30'-56' Jib
- Single Line Hook
- 3 blocks
- Telescopic boom HA: 41-223' (12,5m- 67,8m)
- rooster sheave
- HAV17: Double folding swing-away jib 30'-56' (9m/17m) manual offset 20 degree/40 degree
1-sheaved head, Incl. transport storage
- VA16: 8m/16m...
|
|
|
|
Syracuse, NY
Posted on: October 19
Additional Information
48'-262' Main Boom, 32'-65' Hydraulic offsettable Jib, 26'-52' Telescopic boom extension,
- 48'-262' Main Boom
- 32'-65' Hydraulic offsettable Jib
- 26'-52' Telescopic boom extension
- 213,000 lbs of counterweight
-125ton-5 sheave hook block
- 80 ton- 3 sheave hook block
- single line hook
- Dolly Preparation, with automatic rigging system
- Innovative Demag IC-1 crane con...
|
|
|
|
Syracuse, NY
Posted on: October 19
Additional Information
210' 6 section Main Boom, Drive/Steering 12 x 8 x 10, automated rear axle steering system.
CRANE CARRIER:
- 210' 6 section Main Boom
- Drive/Steering 12 x 8 x 10
- automated rear axle steering system
- 4 telescopic outriggers with automatic leveling
- Automatic centralized lubrication
- 8 cylinder DaimlerChrysler OM 502 LA - 612 HP Tier 3 diesel engine
- ZF AS-Tronic incl...
|
|
|
|
Syracuse, NY
Posted on: October 19
Additional Information
3-axle CITY CRANE, Drive & Steer 6x4x6, Main boom 102'
- 3-axle CITY CRANE
- Drive & Steer 6x4x6
- Main boom 102'
- Boom head traverse cpl.: Searcher hook, incl.shackle and hook
- HAV13: 7,1/ 13,0m, Double folding swing-away jib, manual offset 30°, 1-sheaved head, Incl. transport storage, Includes HAV7
- Counterweight rigging device
- Cast counterweight 3-pieces
- Hook bl...
|
- Electronic Scams
- Home-based jobs
- Fake Rentals
- Bad Buyers
- Non-Existent Merchandise
- Secondhand Items
- More...
|
- When selling, do not put your home address in your ad.
- To avoid scams, buy and sell with people you can meet locally, in person.
- When meeting with someone you don't know, meet in a public place. If that's not possible, have a buddy with you. Also, carry a cell phone; if you feel unsafe, you can call a trusted friend, and stay on the line.
- Never give out financial or private information like account numbers, PayPal login, or social security number.
- If an offer sounds too good to be true, it is. Walk away!
|
|
|
|
