2007 CAT 416E for sale in Lincoln, NE

Machine runs and operates, but has numerous areas that need attention.| Backhoe Loaders SMU/Hrs 6153 | Backhoe Loaders Configuration 4-Wheel Drive Yes Hand Metering Unit Yes Coupler Yes Bucket, Rear Yes Controls, Lever Yes Bucket, GP Yes Stick, Extended Yes Ride Control Yes Air Conditioner Yes EROPS Yes | General Appearance Cleaning Required Yes   Comments: Machine needs washed and cleaned. S.O.S. Taken No Sheet Metal Good Paint Poor   Comments: Paint is scratched, pealing and has extensive surface rust. Grab Irons Good Steps / Ladder Fair   Comments: Right cab entry steps are bent. Cab or Canopy Good Counterweight Good Main Frame Welds Good Crankcase Guard / Battery Box Fair   Comments: Battery box is rusting by door hinge. Fuel Tank Good Fenders Good Eng. Enclose Hood / Stack Fair   Comments: Both engine side panels are cracked at mount holes. Radiator Grill & Shroud Good | Safety Items Horn Poor   Comments: Inop ROPS Yes | Gauges / Operator Station / Console Back Up Alarm Yes Current O&MM Yes Current Safety Manual Yes Seat Belt Good Glass/Mirrors Good Air Conditioner Good   Comments: Ambient air temp was to cold to test properly. Door Latches Good EMS Panel / Warnings Good Seat Cushhion / Arm Rest Good Heater Good Switches Good Gauges Good Meter Good Dash Console Good | Engine Notes Engine seemed to operate properly. Belts / Pulleys Good Exhaust / Mufflers Good Air Cleaners Fair   Comments: Dusty Smoke (B/D/L/W) Normal Oil Pressure (H/L/N) Normal Anti-Freeze Color Red Fluid Levels OK? Yes Water in Oil No Knocking No Blow By No Oil Leaks No | Cooling System Leaks No Belts / Pulleys Good Hoses Good Radiator Good | Electrical / Starting and Charging System Signal Lights Yes Lighting Good Wiring Good Alternator Good Starter Good Batteries / Cables Good | Transmission Notes Transmission seemed to shift properly. Leaks No Transmission - Noisy No Transmission - Forward Shifts Good Transmission - Reverse Shifts Good Lines / Fittings Good Universal Joints Good Torque Converter Good Seals Good Controls Good Case Good Transmission - Type Good   Comments: Standard shift | Steering Lines / Fittings Good Steering Cylinder Good Tie Rods / Rod Ends Good Steering Linkage Good | Brakes Holding What Gear? 2nd Leaks No Parking Brake Good | Hydraulics Leaks Yes Accumulator Charge - Ride Control Good Control Linkage Good Pumps & Valves Fair   Comments: Loader control valve is leaking, and backhoe control valve is covered in oily grime. Hose Lines Fair   Comments: Hoses off hydraulic tank, loader control valve, and up front side of boom are leaking. Needs areas cleaned to see which hoses are leaking. Stick Cylinder Fair   Comments: Cylinder is leaking and needs resealed. Out Rigger Cylinder Good Boom Cylinder Fair   Comments: Cylinder is leaking and needs resealed. Tilt Cylinder Good Lift Cylinders Good Operating Condition Good | Boom And Stick Swing Pivot Fair   Comments: Swing frame mount pins and bushings are to the point of needin work. Stick Pins & Bushings Fair   Comments: Stick mount pin and bushings have noticable play in them. Boom Good Boom Pins & Pushings Fair   Comments: Boom mount pins and bushings are worn to the point of needing work. Stick Fair   Comments: Extendable inserts are worn and need replaced. | Bucket Bucket Capacity 1.25 CYD Notes Back side of bucket is rusting on both sides. Loader Frame Good Loader Pins & Bushings Fair   Comments: Loader pins and bushings have noticable play in them. Bucket Linkage Fair   Comments: Loader bucket linkage has noticable play in it. Bucket Sides Good Bucket Bottom Good Cutting Edges Good | Rear Bucket Notes 24" Bucket Sides Good Bucket Bottom Good Teeth / Adapters Fair   Comments: Adapters are worn causing teeth to be loose. | Final Drives Leaks Yes Front Final Drives Good Differentials Fair   Comments: Rear pinion seal is seeping. Trunion Good Wheel Lugs & Rims Good | Tires Tire Size 12.5/80-18 19.5L24 Left-Rear - Side Cuts Section No Left-Rear - Tread Cuts/Chunks Yes   Comments: Tire treads are chopped. Left-Rear - Recapped No Left-Rear - Tread Depth in 1/32in 18/32 Left-Rear - Make/Serial# Samson Right-Rear - Side Cuts Section No Right-Rear - Tread Cuts/Chunks Yes   Comments: Tire treads are chopped. Right-Rear - Tread Depth in 1/32in 18/32 Right-Rear - Make/Serial# Samson Left-Front - Side Cuts Section No Left-Front - Tread Cuts/Chunks Yes Left-Front - Recapped No Left-Front - Tread Depth in 1/32in 5/32 Left-Front - Make/Serial# Samson Right-Front - Side Cuts Section No Right-Front - Tread Cuts/Chunks Yes Right-Front - Recapped No Right-Front - % Life Remaining 18/32 Right-Front - Tread Depth in 1/32in 18/32 Right-Front - Make/Serial# Samson


Vermeer NAVIGATOR D16X20 SERIES II -

Vermeer NAVIGATOR D16X20 SERIES II -

Hutchinson, KS
Posted on: October 19
Additional Information (40) Drill pipe (400') Starter rod Hex collar Transmitter housing w/ bit 2008 Redi-Haul trailer with hose reel and tool box 2008 Vermeer MX125 500-gallon tank...

BADGER CD4430 -

BADGER CD4430 -

Syracuse, NY
Posted on: October 19
Additional Information 75' three section main boom, optional jib available, auxiliary lifting sheave, block, ball, - 75' three section main boom - optional jib available - auxiliary lifting sheave - block - ball - auxiliary hoist option available - drum rotation indicator - A2B system - all wheel drive & crab steering - cantilever style outriggers - air conditioned cab & MORE!!!...

Demag AC100-4 -

Demag AC100-4 -

Syracuse, NY
Posted on: October 19
Additional Information 39-164' Main boom, Optional 33-62' jib, Swing-away rooster sheave, 4.9 ft. Runner, 2nd Drum, - 39-164' Main boom - Optional 33-62' jib - Swing-away rooster sheave - 4.9 ft. Runner - 2nd Drum - 5 sheaves in boom - counter weight 47,000lb 6 sections - outriggers vertical & horizontal movement fully hydraulic 4 outrigger bases - Engine Daimler Chrysler in both upper and low...

Demag AC100-4L -

Demag AC100-4L -

Syracuse, NY
Posted on: October 19
Additional Information IN STOCK IN NY!! 39.4' - 194.9' Main boom, 32.8' - 62.3' Swing-away rooster sheave , - 39.4' - 194.9' Main boom - 32.8' - 62.3' Swing-away rooster sheave, Double folding swing-away hydraulic offset 40 degrees - Variable telescopic boom extention manual offset 20 degrees/ 40 degrees MS Runner - 80 ton 5 sheave hook block - 50 ton 3 sheave hook block - 20 ton single sheave ho...

Demag AC140 -

Demag AC140 -

Syracuse, NY
Posted on: October 19
Additional Information Main boom 197' with quick disconnect system, 30'-56' swing-away jib, - Main boom 197' with quick disconnect system - 30'-56' swing-away jib - 52' main boom extension(2x26') - 5 sheave block - 3 sheave block - 5 axle carrier - Drive & Steer 10x8x8 - dolly preperation - quick disconnect for outriggers - second hoist - air conditioning - drum rotation indicators - Rooster she...

Don't Be a Victim of Fraud

  • Electronic Scams
  • Home-based jobs
  • Fake Rentals
  • Bad Buyers
  • Non-Existent Merchandise
  • Secondhand Items
  • More...

Don't Be Fooled

  • When selling, do not put your home address in your ad.
  • To avoid scams, buy and sell with people you can meet locally, in person.
  • When meeting with someone you don't know, meet in a public place. If that's not possible, have a buddy with you. Also, carry a cell phone; if you feel unsafe, you can call a trusted friend, and stay on the line.
  • Never give out financial or private information like account numbers, PayPal login, or social security number.
  • If an offer sounds too good to be true, it is. Walk away!

More Listings

2008 CAT 416E
Lincoln, NE
2007 CAT 247B2
Omaha, NE
2007 CAT 247B
Omaha, NE
2007 CAT 420E
Lincoln, NE
2007 CAT 950H
Arlington, NE