Assembly Cell Technician
Company Name:
Eaton Corporation
Job Description
Eaton located in Shawnee, OK has an opening for an Assembly Cell Technician. This position is on 3rd shift (11:00pm-7:00am).
The incumbent will be responsible for properly and safely assembling and/or testing hydraulic components using gauging and other quality audits.
Essential Functions:
-Communicate with peers, area supervisor, and area engineer to ensure a quality product and internal/external Customer satisfaction.
-Perform scrap and time card entries at the end of each shift.
-Read and use routing sheets, ATS specifications, and assembly/test instructions and booklets to properly assemble and test hydraulic motors. Use routing sheets, operating instructions, and surface appearance templates to properly assemble gerolers/geroters.
-Properly select and assemble a variety of parts involving the pressing of bearings, fitting and alignment of shafts, seating seals, spacers, and retainers.
-Visually inspect parts for defects and adjust/ align parts for proper fit as needed.
-Perform supportive maintenance duties such as, but not limited to, Bearing Press oil and filter checks.
-Properly use and maintain all gauging and assembly equipment.
-Move materials, as necessary, using forklift or other material-handling devices.
-Perform cell housekeeping duties on each shift along with provisional standards meeting 5-S requirements.
-Perform tasks as necessary to meet other ELS requirements, i.e. set-up reduction, CFM, error proofing, etc.
-Perform procedures necessary to ensure compliance with the Eaton Safety Process and ensure the personal safety of the incumbent including eye safety, hearing conservation, machine safety guards, ergonomic movement, lock out/tag out, MSDS procedures, and OHSA regulations.
-Assist in maintaining an atmosphere of continuous improvement and team efforts for accomplishing departmental and plant goals.
-Perform other related duties as assigned by supervisor.
-Meet standards as communicated by supervisor.
Test Stand Operation:
-Select and obtain proper fixtures for performance tests on a variety of hydraulic products.
-Install units onto fixtures and select and key in prescribed programs to conduct performance tests (PSI, V.E./M.E, etc) on manual and computer numerical controlled test stands.
-Observe and record instrument readings and any performance failures completely and accurately.
-Ensure each motor is labeled/packaged completely with appropriate packing material.
-Maintain all fluid levels and restock all boxing stations at the end of each shift.
-Ensure the quality of the products by verifying components and observe for leakage where applicable.
Eaton is a power management company with 2013 sales of $22.0 billion. Eaton provides energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton has approximately 102,000 employees and sells products to customers in more than 175 countries. For more information, visit .
Basic Qualifications (Including Educational Requirements)
Basic
Qualifications:
-High School Diploma or GED from an accredited institution is required.
-Minimum 1 year of manufacturing assembly or repair experience in a production environment is required.
-Must be legally authorized to work in the United States without company sponsorship.
-Must reside within a 50 mile radius of work location; no relocation benefit offered.
Position Criteria:
-Demonstrate basic mechanical aptitude and understanding of assembly terminology.
-Demonstrate basic computer data entry skills.
-Ability to read, understand and effectively apply information contained in all applicable documents such as operating instructions, dimensional sheets and/or blueprints (including geometric dimensioning and tolerancing).
-Prior history of satisfactory operation of mechanized material handling devices such as fork truck and scissor lift and/or willingness and ability to complete and pass training/licensing course within first week in this classification.
-Ability and willingness to work overtime, weekends and any shift as needed.
-Ability to stand, sit and/or walk on a hard surface as well as safely bend, stoop, reach and use ladder up to 8 hours a day, occasionally up to 12 hours per day.
-Vision to accurately read all necessary production documents and computer monitor screens.
-Ability to lift 25 pounds frequently and occasionally 50 pounds or more ( essential: lift 10 lbs regularly, not above shoulder height, to the extent that limited jobs with this requirement exist).
Preferred
Qualifications:
-Vocational School training, which includes comparable experience is preferred.
Assembly Cell Technician
OK-Shawnee
80165BR Estimated Salary: $20 to $28 per hour based on qualifications.
Eaton Corporation
Job Description
Eaton located in Shawnee, OK has an opening for an Assembly Cell Technician. This position is on 3rd shift (11:00pm-7:00am).
The incumbent will be responsible for properly and safely assembling and/or testing hydraulic components using gauging and other quality audits.
Essential Functions:
-Communicate with peers, area supervisor, and area engineer to ensure a quality product and internal/external Customer satisfaction.
-Perform scrap and time card entries at the end of each shift.
-Read and use routing sheets, ATS specifications, and assembly/test instructions and booklets to properly assemble and test hydraulic motors. Use routing sheets, operating instructions, and surface appearance templates to properly assemble gerolers/geroters.
-Properly select and assemble a variety of parts involving the pressing of bearings, fitting and alignment of shafts, seating seals, spacers, and retainers.
-Visually inspect parts for defects and adjust/ align parts for proper fit as needed.
-Perform supportive maintenance duties such as, but not limited to, Bearing Press oil and filter checks.
-Properly use and maintain all gauging and assembly equipment.
-Move materials, as necessary, using forklift or other material-handling devices.
-Perform cell housekeeping duties on each shift along with provisional standards meeting 5-S requirements.
-Perform tasks as necessary to meet other ELS requirements, i.e. set-up reduction, CFM, error proofing, etc.
-Perform procedures necessary to ensure compliance with the Eaton Safety Process and ensure the personal safety of the incumbent including eye safety, hearing conservation, machine safety guards, ergonomic movement, lock out/tag out, MSDS procedures, and OHSA regulations.
-Assist in maintaining an atmosphere of continuous improvement and team efforts for accomplishing departmental and plant goals.
-Perform other related duties as assigned by supervisor.
-Meet standards as communicated by supervisor.
Test Stand Operation:
-Select and obtain proper fixtures for performance tests on a variety of hydraulic products.
-Install units onto fixtures and select and key in prescribed programs to conduct performance tests (PSI, V.E./M.E, etc) on manual and computer numerical controlled test stands.
-Observe and record instrument readings and any performance failures completely and accurately.
-Ensure each motor is labeled/packaged completely with appropriate packing material.
-Maintain all fluid levels and restock all boxing stations at the end of each shift.
-Ensure the quality of the products by verifying components and observe for leakage where applicable.
Eaton is a power management company with 2013 sales of $22.0 billion. Eaton provides energy-efficient solutions that help our customers effectively manage electrical, hydraulic and mechanical power more efficiently, safely and sustainably. Eaton has approximately 102,000 employees and sells products to customers in more than 175 countries. For more information, visit .
Basic Qualifications (Including Educational Requirements)
Basic
Qualifications:
-High School Diploma or GED from an accredited institution is required.
-Minimum 1 year of manufacturing assembly or repair experience in a production environment is required.
-Must be legally authorized to work in the United States without company sponsorship.
-Must reside within a 50 mile radius of work location; no relocation benefit offered.
Position Criteria:
-Demonstrate basic mechanical aptitude and understanding of assembly terminology.
-Demonstrate basic computer data entry skills.
-Ability to read, understand and effectively apply information contained in all applicable documents such as operating instructions, dimensional sheets and/or blueprints (including geometric dimensioning and tolerancing).
-Prior history of satisfactory operation of mechanized material handling devices such as fork truck and scissor lift and/or willingness and ability to complete and pass training/licensing course within first week in this classification.
-Ability and willingness to work overtime, weekends and any shift as needed.
-Ability to stand, sit and/or walk on a hard surface as well as safely bend, stoop, reach and use ladder up to 8 hours a day, occasionally up to 12 hours per day.
-Vision to accurately read all necessary production documents and computer monitor screens.
-Ability to lift 25 pounds frequently and occasionally 50 pounds or more ( essential: lift 10 lbs regularly, not above shoulder height, to the extent that limited jobs with this requirement exist).
Preferred
Qualifications:
-Vocational School training, which includes comparable experience is preferred.
Assembly Cell Technician
OK-Shawnee
80165BR Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
