Equipment Engineer
Location : Augusta, ME
We are seeking an Equipment Engineer to take on the responsibility of availability, uptime and performance
improvements of our diffusion and oxidation equipment.
5-day M-F 1st shift position.
Performance Objectives
The individual will be expected to:
o Support and maintain multiple diffusion and oxidation furnace platforms.
o Evaluate and implement creative solutions to insure necessary availability, improved performance and
reduced cost.
o Write maintenance procedures and train equipment technicians on shifts to perform PMs per the procedures.
o Resolve unplanned equipment issues and update necessary documentation.
o Improve availability of the diffusion equipment by 5% in the first 12 months.
o Reduce variation in availability and obtain an M-ratio of > 1 through improvements in PM procedures.
o Develop and implement a migration strategy from preventive maintenance to predictive maintenance.
o Write maintenance procedures and fully train equipment technicians to perform the procedures.
o Control equipment and maintenance costs at or below industry standards thru reduced consumption & proper
PMs.
o Engage with process engineering for improvement opportunities.
o Improve throughput by reduce speed loss associated to equipment performance.
o Possess good computer skills and ability to use Microsoft Office Products.
o Demonstrate electronic and mechanical troubleshooting skills.
o Work with tenacity and flexibility.
o Work with a strong attention to detail and procedures.
o Demonstrate excellent critical thinking and planning skills.
o Ability to create and execute action plans.
o Ability to multi-task effectively.
Requirements
o BS in Mechanical or Electrical Engineering, or an AS degree in an Electro-Mechanical field with applicable
field experience.
o 5 yrs diffusion field experience with Apogee and TEL furnace experience preferred.
o Demonstrated experience in diffusion / oxidation platforms including:
o TEL Alpha8 S/SE Furnaces
o BTU Apogee 1
Furnaces
o Semitherm VTP-1500 Furnaces
o Bruce BDF 200 Horizontal Furnaces
o MRL 1424 Furnaces
o Demonstrated experience in diffusion / oxidation metrology including:
o Contamination control (SPV, CV, Tencor, Orbot)
o Process monitoring (Thickness, stress)
o Demonstrated equipment engineering skills with solid experiences is resolving tool related challenges.
o Demonstrated experiences in improving overall maintenance effectiveness including PM success rate, green
to green improvements, and continuous PM improvements.
o Position requires in-depth knowledge of Predictive and Preventive Maintenance techniques.
Estimated Salary: $20 to $28 per hour based on qualifications.
We are seeking an Equipment Engineer to take on the responsibility of availability, uptime and performance
improvements of our diffusion and oxidation equipment.
5-day M-F 1st shift position.
Performance Objectives
The individual will be expected to:
o Support and maintain multiple diffusion and oxidation furnace platforms.
o Evaluate and implement creative solutions to insure necessary availability, improved performance and
reduced cost.
o Write maintenance procedures and train equipment technicians on shifts to perform PMs per the procedures.
o Resolve unplanned equipment issues and update necessary documentation.
o Improve availability of the diffusion equipment by 5% in the first 12 months.
o Reduce variation in availability and obtain an M-ratio of > 1 through improvements in PM procedures.
o Develop and implement a migration strategy from preventive maintenance to predictive maintenance.
o Write maintenance procedures and fully train equipment technicians to perform the procedures.
o Control equipment and maintenance costs at or below industry standards thru reduced consumption & proper
PMs.
o Engage with process engineering for improvement opportunities.
o Improve throughput by reduce speed loss associated to equipment performance.
o Possess good computer skills and ability to use Microsoft Office Products.
o Demonstrate electronic and mechanical troubleshooting skills.
o Work with tenacity and flexibility.
o Work with a strong attention to detail and procedures.
o Demonstrate excellent critical thinking and planning skills.
o Ability to create and execute action plans.
o Ability to multi-task effectively.
Requirements
o BS in Mechanical or Electrical Engineering, or an AS degree in an Electro-Mechanical field with applicable
field experience.
o 5 yrs diffusion field experience with Apogee and TEL furnace experience preferred.
o Demonstrated experience in diffusion / oxidation platforms including:
o TEL Alpha8 S/SE Furnaces
o BTU Apogee 1
Furnaces
o Semitherm VTP-1500 Furnaces
o Bruce BDF 200 Horizontal Furnaces
o MRL 1424 Furnaces
o Demonstrated experience in diffusion / oxidation metrology including:
o Contamination control (SPV, CV, Tencor, Orbot)
o Process monitoring (Thickness, stress)
o Demonstrated equipment engineering skills with solid experiences is resolving tool related challenges.
o Demonstrated experiences in improving overall maintenance effectiveness including PM success rate, green
to green improvements, and continuous PM improvements.
o Position requires in-depth knowledge of Predictive and Preventive Maintenance techniques.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
