Senior Electrical Engineer, Hardware Design
Company Name:
BAE Systems
The EO/IR Systems Hardware Group
at BAE Systems has a requirement for a senior level electrical hardware
engineer with experience in the design and implementation of state-of-the-art
digital and analog electronics as well as
FPGA design and verification. It is highly desirable that the
candidate have expertise in the electronics associated with electro-optical
systems and/or precision gimbaled systems. It is desired that the candidate
have experience with ground and airborne systems. The position will
require interaction with multiple engineering disciplines as well as customer
and subcontractor representatives.
The candidate must be able to
work with minimal supervision and drive the electrical design from concept,
through manufacture and debug, to operational deployment. The candidate will be
required to generate and maintain project schedules and should possess
effective communication, report writing, and presentation skills.
We are seeking candidates with
experience in these two areas:
Digital board design
FPGA design and verification
Required Skills and Education
- Design and document creative, state of the art solutions for real time embedded systems
- Contribute to proposals, sub-system documentation, and design reviews
- Electrical board design and implementation
- Component selection and design data base management
- Schematic capture using Cadence Design HDL and /or Cadence Capture CIS (Orcad)
- Documentation Control
- Board layout
- Signal integrity and termination techniques
- Cadence Sigrity signal Integrity Tools
- Bus topologies, impedance control
- Stack-up, isolation and EMI control
- Familiar with Cadence Allegro layout tool suite
Preferred Skills and Education
- FPGA design and verification
- RTL design (Verilog) and testbench generation/simulation
- Write and execute test cases to cover all functions and corner cases
- Floorplanning
- Constrain and close timing
- Document/comment code
- Linux operating system
- Source control with subversion (svn)
- Familiarity with vendor-specific tools:
- Quartus
- Vivado
- Synplicity
- ModelSim/Questa
- Qsys
- Synopsys Design Constraints
- Application knowledge:
- Memory and processor interfaces
- Hardware pipeline processing
- Hardware algorithm implementation
- Digital system design and implementation
- Processor, memory and peripheral selection, trade-offs
- Power supply and thermal management
-Standard Buss interfaces
- Timing analysis
- PWB layout and implementation
About BAE Systems Electronic Systems
BAE Systems is a global defense, aerospace and security company with more than 80,000 employees worldwide, delivering a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support and services. Our Electronic Systems sector, headquartered in Nashua, N.H., has operations spanning commercial and defense electronics markets and offers a broad portfolio of mission critical electronic systems from flight and engine controls to electronic warfare and night vision systems, surveillance and reconnaissance sensors, secure networked communications equipment, and power and energy management systems. People are the greatest asset in any company. BAE Systems is committed to a high performance culture and provides an environment where the work we do matters and where people are challenged to reach their full potential. Equal Opportunity Employer. Females. Minorities. Veterans. Disabled
Department
1CC_ES ISRS Engineering
Company
BAE_BAE SYSTEMS Info&Elec Sys Intg
Senior Electrical Engineer, Hardware Design
Hudson, New Hampshire
5314BR-1000 Estimated Salary: $20 to $28 per hour based on qualifications.
BAE Systems
The EO/IR Systems Hardware Group
at BAE Systems has a requirement for a senior level electrical hardware
engineer with experience in the design and implementation of state-of-the-art
digital and analog electronics as well as
FPGA design and verification. It is highly desirable that the
candidate have expertise in the electronics associated with electro-optical
systems and/or precision gimbaled systems. It is desired that the candidate
have experience with ground and airborne systems. The position will
require interaction with multiple engineering disciplines as well as customer
and subcontractor representatives.
The candidate must be able to
work with minimal supervision and drive the electrical design from concept,
through manufacture and debug, to operational deployment. The candidate will be
required to generate and maintain project schedules and should possess
effective communication, report writing, and presentation skills.
We are seeking candidates with
experience in these two areas:
Digital board design
FPGA design and verification
Required Skills and Education
- Design and document creative, state of the art solutions for real time embedded systems
- Contribute to proposals, sub-system documentation, and design reviews
- Electrical board design and implementation
- Component selection and design data base management
- Schematic capture using Cadence Design HDL and /or Cadence Capture CIS (Orcad)
- Documentation Control
- Board layout
- Signal integrity and termination techniques
- Cadence Sigrity signal Integrity Tools
- Bus topologies, impedance control
- Stack-up, isolation and EMI control
- Familiar with Cadence Allegro layout tool suite
Preferred Skills and Education
- FPGA design and verification
- RTL design (Verilog) and testbench generation/simulation
- Write and execute test cases to cover all functions and corner cases
- Floorplanning
- Constrain and close timing
- Document/comment code
- Linux operating system
- Source control with subversion (svn)
- Familiarity with vendor-specific tools:
- Quartus
- Vivado
- Synplicity
- ModelSim/Questa
- Qsys
- Synopsys Design Constraints
- Application knowledge:
- Memory and processor interfaces
- Hardware pipeline processing
- Hardware algorithm implementation
- Digital system design and implementation
- Processor, memory and peripheral selection, trade-offs
- Power supply and thermal management
-Standard Buss interfaces
- Timing analysis
- PWB layout and implementation
About BAE Systems Electronic Systems
BAE Systems is a global defense, aerospace and security company with more than 80,000 employees worldwide, delivering a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support and services. Our Electronic Systems sector, headquartered in Nashua, N.H., has operations spanning commercial and defense electronics markets and offers a broad portfolio of mission critical electronic systems from flight and engine controls to electronic warfare and night vision systems, surveillance and reconnaissance sensors, secure networked communications equipment, and power and energy management systems. People are the greatest asset in any company. BAE Systems is committed to a high performance culture and provides an environment where the work we do matters and where people are challenged to reach their full potential. Equal Opportunity Employer. Females. Minorities. Veterans. Disabled
Department
1CC_ES ISRS Engineering
Company
BAE_BAE SYSTEMS Info&Elec Sys Intg
Senior Electrical Engineer, Hardware Design
Hudson, New Hampshire
5314BR-1000 Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
